| Huawei AP361 |
| Technical specifications |
|---|
| Dimensions (diameter x length) | Φ180 mm x 35 mm |
| Weight | 0,45 kg |
| Port type |
1 x 10M/100M/1GE electrical port
(The GE electrical port supports PoE input)
|
| LED indicator | Indicates the power-on, startup, running, alarm, and fault states of the system. |
| Power specifications |
|---|
| Power input | PoE power supply: in compliance with IEEE 802.3af |
| Maximum power consumption | 8,8 W |
| Environmental specifications |
|---|
| Operating temperature | –10°C to +50°C |
| Storage temperature | –40°C to +70°C |
| Operating humidity | 5% to 95% (non-condensing) |
| Radio specifications |
|---|
| Antenna type | Built-in smart antennas |
| Antenna gain |
2,4 GHz: 4 dBi
5 GHz: 5 dBi
|
Maximum quantity of SSIDs
on each radio | ≤ 6 |
| Device capacity | ≤ 128 |
| Maximum transmit power |
2,4 GHz: 20 dBm
5 GHz: 20 dBm
(The actual transmit power depends on local laws and regulations)
|
| Power adjustment increment | 1 dBm |
| Maximum number of nonoverlapping channels |
2.4 GHz (2.412 GHz - 2.472 GHz)
802.11 b/g
802.11 n
802.11 ax
5 GHz (5.18 GHz - 5.825 GHz)
802.11 a
802.11 n
802.11 ac
- 20 MHz: 13
- 40 MHz: 6
- 80 MHz: 3
- 160 MHz: 1
802.11 ax
- 20 MHz: 13
- 40 MHz: 6
- 80 MHz: 3
- 160 MHz: 1
(The number of non-overlapping channels varies with countries)
|
| Fat/Fit AP mode |
|---|
| WLAN features | Compliance with IEEE 802.11ax and compatibility with IEEE 802.11a/b/g/n/ac/ac Wave 2
Maximum ratio combining (MRC)
Space time block code (STBC)
Cyclic delay diversity (CDD)/Cyclic shift diversity (CSD)
Beamforming
Multi-user multiple-input multiple-output (MU-MIMO)
Orthogonal frequency division multiple access (OFDMA)
Compliance with 1024-QAM and compatibility with 256-QAM, 64-QAM, 16-QAM, 8-QAM, quadrature phase shift
keying (QPSK), and binary phase shift keying (BPSK)
Low-density parity-check (LDPC)
Frame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
802.11 dynamic frequency selection (DFS)
Short guard interval (GI) in 20 MHz, 40 MHz, and 80 MHz modes
Wi-Fi multimedia (WMM) for priority-based data processing and forwarding
WLAN channel management and channel rate adjustment
Automatic channel scanning and interference avoidance
Separate service set identifier (SSID) hiding configuration for each AP, supporting Chinese SSIDs
Signal sustain technology (SST)
Unscheduled automatic power save delivery (U-APSD)
Control and Provisioning of Wireless Access Points (CAPWAP) in Fit AP mode
Extended service set (ESS) in Fit AP mode
Advanced cellular coexistence (ACC), minimizing the impact of interference from cellular networks
Multi-user call admission control (CAC)
802.11k and 802.11v smart roaming
802.11r fast roaming (≤ 50 ms) |
| Network features | Compliance with IEEE 802.3ab
Auto-negotiation of the rate and duplex mode and automatic switchover between the Media Dependent
Interface (MDI) and Media Dependent Interface Crossover (MDI-X)
Compliance with IEEE 802.1Q
SSID-based VLAN assignment
VLAN trunk on uplink Ethernet ports
Management channel of the AP's uplink port in tagged or untagged mode
DHCP client, obtaining IP addresses through DHCP
Tunnel data forwarding and direct data forwarding
STA isolation in the same VLAN
IPv4/IPv6 access control list (ACL)
Link layer discovery protocol (LLDP)
Uninterrupted service forwarding upon CAPWAP tunnel disconnection in Fit AP mode
Unified authentication on the WAC in Fit AP mode
WAC dual-link backup in Fit AP mode
Network address translation (NAT) in Fat AP mode
IPv6 in Fit AP mode
IPv6 Source Address Validation Improvement (SAVI)
Multicast Domain Name Service (mDNS) gateway protocol |
| QoS features | WMM parameter management for each radio
WMM power saving
Priority mapping for upstream packets and flow-based mapping for downstream packets
Queue mapping and scheduling
User-based bandwidth limiting
Adaptive bandwidth management (automatic bandwidth adjustment based on the user quantity and radio environment) for user experience improvement
Airtime scheduling
Air interface HQoS scheduling
Intelligent multimedia scheduling algorithm |
| Security features | Unified management and maintenance on the WAC in Fit AP mode
Automatic login, automatic configuration loading, and plug-and-play (PnP) in Fit AP mode
Automatic batch upgrade in Fit AP mode
Telnet
STelnet using SSHv2
SFTP using SSHv2
Web system-based AP management and login through HTTP or HTTPS in Fat AP mode
Real-time configuration monitoring and fast fault locating using the NMS
SNMP v1/v2/v3 in Fat AP mode
System status alarm
Network Time Protocol (NTP) in Fat AP mode |
| Maintenance features |
Zunifikowane monitorowanie i zarz?dzanie w kontrolerze, w trybie Fit AP
Automatyczne logowanie, wczytywanie konfiguracji (plug&play) w trybie Fit AP
Grupowa aktualizacja w trybie Fit AP
Telnet
STelnet z wykorzystaniem SSHv2
SFTP z wykorzystaniem SSHv2
Zarz?dzanie Web poprzez HTTP/HTTPS w trybie Fat AP
Monitorowanie "na ?ywo", szybkie wykrywanie b??dów poprzez NMS
SNMP v1/v2/v3 w trybie Fat AP
System status alarm
NTP (Network Time Protocol) w trybie Fat AP
|
| Location services |
Wi-Fi terminal location
Working with a location server to locate rogue devices
(The AP supports the location service only in Fit AP mode)
|
| Tryb Cloud |
|---|
| WLAN features | Compliance with IEEE 802.11a/b/g/n/ac/ac Wave 2/ax
Maximum ratio combining (MRC)
Space time block code (STBC)
Cyclic delay diversity (CDD)/Cyclic shift diversity (CSD)
Beamforming
Multi-user multiple-input multiple-output (MU-MIMO)
Orthogonal frequency division multiple access (OFDMA)
Compliance with 1024-QAM and compatibility with 256-QAM, 64-QAM, 16-QAM, 8-QAM, quadrature phase shift keying (QPSK), and binary phase shift keying (BPSK)
Low-density parity-check (LDPC)
Frame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
802.11 dynamic frequency selection (DFS)
Short guard interval (GI) in 20 MHz, 40 MHz, and 80 MHz modes
Priority mapping and scheduling that are compliant with Wi-Fi multimedia (WMM) to implement priority-based data processing and forwarding
WLAN channel management and channel rate adjustment.
Automatic channel scanning and interference avoidance
Separate service set identifier (SSID) hiding configuration for each AP
Signal sustain technology (SST)
Unscheduled automatic power save delivery (U-APSD) |
| Network features | Compliance with IEEE 802.3ab
Auto-negotiation of the rate and duplex mode and automatic switchover between the Media Dependent
Interface (MDI) and Media Dependent Interface Crossover (MDI-X)
Compliance with IEEE 802.1Q
SSID-based VLAN assignment
DHCP client, obtaining IP addresses through DHCP
STA isolation in the same VLAN
Access control list (ACL)
Unified authentication on the cloud management platform
Network address translation (NAT) |
| QoS features | Priority mapping and scheduling that are compliant with Wi-Fi multimedia (WMM) to implement priority-based data processing and forwarding
WMM parameter management for each radio
WMM power saving
Priority mapping for upstream packets and flow-based mapping for downstream packets
Queue mapping and scheduling
User-based bandwidth limiting
Airtime scheduling
Air interface HQoS scheduling |
| Security features | Open system authentication
WEP authentication/encryption using a 64-bit, 128-bit, 152-bit or 192-bit encryption key
WPA2-PSK authentication and encryption
WPA2-802.1X authentication and encryption
WPA3-SAE authentication and encryption
WPA3-802.1X authentication and encryption
WPA-WPA2 hybrid authentication
WPA2-WPA3 hybrid authentication
802.1X authentication, MAC address authentication, Portal authentication, etc.
DHCP snooping
Dynamic ARP inspection (DAI)
IP Source Guard (IPSG) |
| Maintenance features | Unified management and maintenance on the cloud management platform
Automatic login, automatic configuration loading, and plug-and-play (PnP)
Batch upgrade supported
Telnet
STelnet using SSHv2
SFTP using SSHv2
Web-based NMS management, and login through HTTP or HTTPS
Real-time configuration monitoring and fast fault locating using the NMS
System status alarm
Network Time Protocol (NTP) |
